After using my homemade Pull up bar for a year, it was time to switch to something a little more rigid. I found this Day 1 Fitness Chin Up, Pull Up, Dip Bar all in 1 and decidedly give it a shot.
The box that all the parts came in from Amazon was nicely packed and was not missing any hardware. It came with options to install into studs, as well as with anchors. I chose to go right into the studs.
For installation, I measured and marked, and pre drilled with a 1/4” drill bit. I then used a 17mm socket attached to my Dewalt 20V drill.
Even with the 1/4” pilot, I had plenty of wood to hold the lag bolts in.